> For the complete documentation index, see [llms.txt](https://greenstarresources.gbca.au/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://greenstarresources.gbca.au/greenstarresources.gbca.au_ratingtools/current-green-star-rating-tools/green-star-buildings/v1.0-rev-c/calculation-guides/movement-and-place-calculation-guide.md).

# Movement and Place calculation guide

Green Star Buildings v1

Guidance on calculation methods for the [*Movement and Place*](https://greenstarresources.gbca.au/greenstarresources.gbca.au_ratingtools/current-green-star-rating-tools/green-star-buildings/v1.0-rev-c/calculation-guides/movement-and-place-calculation-guide.md) credit in Green Star Buildings v1.

{% hint style="warning" %}
**Release 1 - 07/09/2021**

* Initial release for Green Star Buildings v1. (Adapted from Green Star – Design & As Built v1.3)

[#version-control](#version-control "mention")
{% endhint %}

<table data-search="false"><thead><tr><th width="735.25">Section</th></tr></thead><tbody><tr><td><a href="#introduction"><strong>Introduction</strong></a></td></tr><tr><td><a href="#version-control">Version Control</a></td></tr><tr><td><a href="#green-star-buildings">Green Star Buildings</a></td></tr><tr><td><a href="#how-the-calculator-works">How the calculator works</a></td></tr><tr><td><a href="#definitions">Definitions</a></td></tr><tr><td><a href="#acronyms">Acronyms</a></td></tr><tr><td><a href="#determining-the-reference-project"><strong>Determining the reference project</strong></a></td></tr><tr><td><a href="#claiming-improvements"><strong>Claiming Improvements</strong></a></td></tr><tr><td><a href="#appendix"><strong>Appendix</strong></a></td></tr><tr><td><a href="#example-calculations">Example Calculations</a></td></tr></tbody></table>

## <mark style="color:$primary;">Introduction</mark>

## <mark style="color:$primary;">Green Star Buildings</mark>

### Movement and Place credit

**Reducing Private Vehicle Use**

**Emission reduction**\
Emission reduction relates to a reduction in transport emissions directly related to commuting trips to and from the site. Emission reductions are calculated from commuting trips mode share, average trip length and the proportion of trips that may be avoided (e.g. by working from home). Criterion 1 considers reduction in greenhouse gas emissions which contribute to climate change.

**Active mode encouragement**\
Active Mode Encouragement relates to an increase in the mode share of walk and bicycle commuting trips, referred to collectively as “active modes”. It considers encouragement of transport modes that promote health and fitness to commuters as well as having financial benefits and reducing the societal cost of healthcare.

**Vehicle kilometres travelled (VKT) reduction**\
Vehicle kilometres travelled (VKT) reduction for commuting trips, which may be affected by either or both of a reduction in average trip length or a reduction in the mode share of car trips. Criterion 3 considers lessening car dependence which, in addition to reducing greenhouse gas emissions, also reduces local pollution, vehicle crashes, and improves social equality as well as having potential financial benefits to commuters.

**Encouraging Walkability**

The building’s design and location must encourage walking to and from a number of amenities. This means designing roads within the site boundary to prioritise pedestrians, and either providing within, or being located close to, a number of amenities.

**Roads**\
If there are roads within the site boundary, the design must prioritise pedestrians over vehicles. Roads should be designed to be low speed (10km/hr). Pedestrians must have the right of way, and road design must encourage this.

**Amenity diversity**\
Amenity Diversity relates to a site that is located which encourages walking to and from a number of amenities. Amenity diversity is not related to commuting trips but instead considers that motorised trips may be avoided by allowing project users to accomplish errands on foot (e.g. during a lunch break), in order to prioritise pedestrians.

### <mark style="color:$primary;">How the calculator works</mark>

The Movement and Place calculator (‘the calculator’) determines the criteria achievement under the ‘Movement and Place’ credit. This calculation guide (‘the guide’) should be used in conjunction with the calculator.

A Sustainable Transport Plan (or equivalent sustainable transport strategy) must be prepared to ensure that all aspects of transport for regular project occupants have been considered and addressed as part of the Movement and Place credit.

Criteria achievement is then awarded, based on the proposed project’s holistic approach to reducing its impacts from transport in line with the criteria listed below in comparison to a reference project in a similar location and the diverse range of amenities available for the building occupants.

Credit achievement is based on the below criteria:

* Emissions reduction (40%).
* Active mode encouragement (90%)
* Vehicle kilometres travelled (vkt) reduction (>20%); and
* Encouraging walkability.

The calculator provides carbon emissions reductions as a result of transport design initiatives, such as removal of a car parking space, provision of cyclist facilities or carpooling initiatives.

The calculator works by compares the Proposed project with a Reference project against the criteria listed in the section above.

The Reference project characteristics are automatically calculated within the calculator. Credit achievement is determined by:

* Comparing the performance of the Proposed project with the Reference project in line with the Reducing private car use criterion; and
* Determining the walkability score of the project’s location, based on the diverse range of amenities around the project. There must be at least 10 amenities across five categories within 400m radius of the building, as determined by Google Places API.

### <mark style="color:$primary;">Definitions</mark>

[Glossary](https://greenstarresources.gbca.au/greenstarresources.gbca.au_ratingtools/current-green-star-rating-tools/all-definitions.md#proposed-building)

[Glossary](https://greenstarresources.gbca.au/greenstarresources.gbca.au_ratingtools/current-green-star-rating-tools/all-definitions.md#reference-project)

[Glossary](https://greenstarresources.gbca.au/greenstarresources.gbca.au_ratingtools/current-green-star-rating-tools/all-definitions.md#mode-share)

[Glossary](https://greenstarresources.gbca.au/greenstarresources.gbca.au_ratingtools/current-green-star-rating-tools/all-definitions.md#project-population)

[Glossary](https://greenstarresources.gbca.au/greenstarresources.gbca.au_ratingtools/current-green-star-rating-tools/all-definitions.md#suitably-qualified-professional)

### <mark style="color:$primary;">Acronyms</mark>

**ABS**\
Australian Bureau of Statistics.

**MTWP**\
Method of Travel to Work (a Census statistic).

**SA2**\
Statistical Area Level 2, a Census geographical unit representing a population of 3,000 to 25,000 people.

**VKT**\
Vehicle Kilometres Travelled.

## <mark style="color:$primary;">Determining the reference project</mark>

This Section describes how the Reference project’s emissions, VKT and active mode benchmarks are determined.

### Mode share

Mode share data for the reference project is determined using SA2 level data from the ABS 2011 Census Method of Travel to Work (MTWP) data. The Reference project is a similar building type as the proposed project, which has the average mode share characteristics of places of employment within the same SA2 area as the proposed project.

The exception to the above is where the user selects “multi-unit residential” as the primary building type. In this instance the mode share data has the average characteristics of residents leaving an SA2 zone to travel to a place of employment elsewhere.

### Avoided trips

Avoided trips refer to the propensity of employees to work from home or otherwise not take a commuting trip during a work week. Avoided trips are not differentiated by SA2 due to the large fluctuations and the difficulty of separating working from home data in the Census between employees who work from home occasionally compared to self-employed persons who work from home the majority of the time.

The standard value for avoided trips is 2% which is the 2011 Census value for working from home for all of Australia.

### Average trip length

Average trip length for the Reference project is determined using the data from the abs 2011 census method of travel to work (MTWP) data. using transport network analysis along the public road network combined with the number of employees who travel to a given SA2 from every other SA2, it is possible to determine the average trip length for employees who commute to the SA2 of interest.

### Work weeks

‘Work weeks’ refers to the number of normal working weeks per annum for employees of the Reference project.

This is assumed to be 48 weeks (assuming 4 weeks of annual leave). Healthcare workers are assumed to work 47 weeks per annum and Education workers assumed to work 40 weeks per annum. This is separate from avoided trips, which only refers to additional avoided trips.

### Walkable amenities

Google Maps API are used to determine the walkability of the building’s location. Unlike other Performance Pathway criteria (1, 2 and 3), criterion 4 is not calculated by comparison with a Reference project.

### Emissions intensity

Emissions intensity (GJ per km) for Tram and Train passenger is estimated using a report prepared by SKM MMA in 2011 for the former Department of Energy Efficiency and Climate Change[^1] and emissions intensity ( g CO2-e per km) for car driver, motorcycle driver and bus passenger is estimated using a report[^2] prepared by Environment Protection Authority (EPA) Victoria.

Finally, the Australian National Greenhouse Factors (October 2020) are used to represent the emissions intensity of electricity used to power trains and trams.

*Table 1: Emissions intensity values (Source: SKM MMA Report and EPA-VIC)*

| Mode             | GJ per km            | g CO2-e per GJ                      | g CO2-e per km                                                              |
| ---------------- | -------------------- | ----------------------------------- | --------------------------------------------------------------------------- |
| Car driver       |                      |                                     | 233.7 <sup>B</sup>                                                          |
| Motorbike driver |                      |                                     | 91.4 <sup>B</sup>                                                           |
| Bus passenger    |                      |                                     | 122.0 <sup>B</sup>                                                          |
| Tram passenger   | 0.00052 <sup>A</sup> | Varies with each state <sup>C</sup> | <p>Based on the two preceding columns<br>(GJ per km) × (g CO2-e per GJ)</p> |
| Train passenger  | 0.00048 <sup>A</sup> | Varies with each state <sup>C</sup> | <p>Based on the two preceding columns<br>(GJ per km) × (g CO2-e per GJ)</p> |
| Ferry passenger  |                      | -                                   | 122.0 <sup>B</sup>                                                          |

A: Shown as MJ / passenger kilometre (2006) in Table 6-7 of the SKM MMA report. Values are urban, heavy rail (Train) and urban, light rail (Tram).

B: Shown as kg CO2-e per km in section 3.12 Staff commuting, pg. 25 of the Greenhouse gas (GHG) inventory and management plan 2018–2019

C: This value varies according to the emissions intensity of the local electricity grid. See Table 2 below.

*Table 2: Emissions intensity of grid (Source: National Greenhouse Accounts (NGA) factors, October 2020)*

<table data-search="false"><thead><tr><th>State</th><th>kg CO2-e per GJ</th></tr></thead><tbody><tr><td>Australian Capital Territory</td><td>249</td></tr><tr><td>Northern Territory</td><td>193</td></tr><tr><td>New South Wales</td><td>249</td></tr><tr><td>Queensland</td><td>258</td></tr><tr><td>South Australia</td><td>145</td></tr><tr><td>Tasmania</td><td>48</td></tr><tr><td>Victoria</td><td>302</td></tr><tr><td>Western Australia</td><td>195</td></tr></tbody></table>

## <mark style="color:$primary;">Claiming improvements</mark>

This Section outlines the documentation required to claim improvements for the Proposed project against the Reference project.

The justifications must be included in a site-specific Transport Plan developed early in the design phase (i.e. Schematic Design phase). The Transport Plan must include a site-specific transport assessment, and the recommendations of the Plan should be included in the design, construction, and operation of the project.

### Mode share changes

The following justifications are to be considered when filling out the appropriate Submission Template for assessment:

**Walk**\
Demonstrate that the claimed percentage of project users live (or in the case of a residential building, work) within walking distance of the building. The definition of walking distance depends on the project type. For example, students at a tertiary institution may have a higher tolerance for walking distance compared with office staff. Students at a primary school are likely to have the lowest tolerance for walking distance. It is the responsibility of the project team to justify the definition of walking distance appropriate to the project. The project team must also justify the assumption that project users live nearby. For example, education or healthcare institutions with associated student or staff accommodation may be able to justify this. The project team is encouraged to submit a Technical question to the GBCA to provide justification of their assumptions.

**Cycle**\
Demonstrate that cycle facilities are available for the claimed proportion of project users. Building / fitout initiatives should be in place to facilitate cycle use, including secure bicycle parking, weather protection, changing facilities with provision of showers and lockers etc. Secure bicycle parking is defined as that which is in accordance with AS 2890.3.

**Car (driver, passenger)**\
Demonstrate that car parking is only available for the claimed proportion of car drivers and parking is not freely and readily available near the site for occupants to use. An incentive scheme for carpooling or to give up a parking space may also be claimed with documentation of how the scheme works and a justification for the proportion of reduced car trips claimed.

**Public transport (train, tram, bus, and ferry)**\
Demonstrate that a scheme has been developed for incentivising public transport use. The claimed increase must be proportional to the incentive scheme.

### Trip length changes

Evidence must be produced that the workforce for this project commutes shorter distances than the Reference project. for example, education or healthcare institutions with associated student or staff accommodation may be able to justify this. This could also apply to a primary or secondary school with a zoning policy for enrolments. The project team is encouraged to submit a Credit Interpretation Request to the GBCA to provide justification of their assumptions. Route distances should be calculated via the route that is taken, rather than in a straight line (‘ as the crow flies’).

### Avoided trips changes

An incentive scheme must be demonstrated or evidence of past rates of working from home must be produced to justifying increasing the avoided trips percentage for the company or workers/residents in the project. This does not apply to populations such as students, who would not typically receive incentives for working from home.

### Work weeks changes

Evidence must be produced of a company policy with a higher than standard allowance for annual leave (i.e. greater than four weeks per annum)

### Emissions intensity changes

Evidence must be produced of a company provided green fleet including vehicle specifications demonstrating the grams of CO2-e per VKT. The vehicles must be available for staff travel between home and work. A fleet made available solely for staff transport during working hours cannot meet the requirements of this credit, as the credit covers only travel between home and the project.

## <mark style="color:$primary;">Appendix</mark>

### Example calculations

The following examples are based on the Movement and Place calculator.

These worked examples are not intended to cover all possible ways to credit achievement using the calculator, given the flexibility intended by the Movement and Place credit. Project teams are encouraged to propose additional avenues for achieving emissions reductions, increasing active transport modes, and reducing vehicle kilometres travelled.

#### Example 1

This example is for an office building in a regional town in Victoria. The building’s employees are offered small financial incentives for participating in a carpooling program and a larger incentive for cycling to work.

The project team can demonstrate, by way of program statistics or through an employee survey that 10% of employees are currently participating in, or willing to participate in a future carpooling scheme operated by the company residing in the building.

In addition, cycling facilities are sufficient to accommodate 5.3% of the building’s employees.

This evidence allows the building to claim higher rates of car passenger and bicycle mode share relative to the Reference project.

To enter this into the calculator:

{% stepper %}
{% step %}

#### Update the Proposed mode split

Update the Proposed mode split for car passenger to 10%.
{% endstep %}

{% step %}

#### Update the bicycle mode split

Update the Proposed mode split for bicycle to 5.3%.
{% endstep %}

{% step %}

#### Enter the remaining transport modes

Enter the remaining modes of transport as per the Sustainable Transport plan, ensuring the total mode share totals 100%.
{% endstep %}
{% endstepper %}

<table data-search="false"><thead><tr><th>Mode of travel</th><th>Reference</th><th>Proposed</th></tr></thead><tbody><tr><td>Train</td><td>0.32%</td><td>0.3%</td></tr><tr><td>Bus</td><td>1.18%</td><td>1.18%</td></tr><tr><td>Ferry</td><td>0%</td><td>0%</td></tr><tr><td>Tram</td><td>0.05%</td><td>0%</td></tr><tr><td>Car (Driver)</td><td>85.24%</td><td>77.47%</td></tr><tr><td>Car (Passenger)</td><td>6.27%</td><td>10%</td></tr><tr><td>Motorbike</td><td>0.26%</td><td>0.26%</td></tr><tr><td>Bicycle</td><td>1.19%</td><td>5.3%</td></tr><tr><td>Walk</td><td>5.49%</td><td>5.49%</td></tr><tr><td>Total mode share</td><td>100%</td><td>100%</td></tr><tr><td>Avoided Trips</td><td>2%</td><td>2%</td></tr><tr><td>Average trip length (km)</td><td>12.27</td><td>12.27</td></tr><tr><td>Work Weeks</td><td>48</td><td>48</td></tr><tr><td>Trips per annum</td><td>470.4</td><td>470.4</td></tr><tr><td>Emissions per trip (g CO2-e/trip)</td><td>2617.69793866</td><td>2380.03611232</td></tr><tr><td>Total emissions (tonnes/person/annum)</td><td>1.23136511</td><td>1.11956899</td></tr><tr><td>Total vkt (vkt/person/annum)</td><td>4919.8891392</td><td>4471.4196576</td></tr><tr><td>Active modes (mode share % for active modes)</td><td>6.68%</td><td>10.79%</td></tr></tbody></table>

In addition, the company that occupies the building supplies company cars that are low emission vehicles in comparison to the average emissions intensity for cars and is able to verify this with supporting documentation. As such, the project team are able to claim lower emissions intensity for those who drive to work. These low-emission company vehicles occupy 20 of the available 40 car spaces on the project site, with a given emissions intensity of 130 g CO2-e/passenger km.

Therefore, the project team can enter the following emissions intensity for the project:

$$
\frac{(258 \times 20) + (130 \times 20)}{40\ vehicles} = 194
$$

To enter this into the calculator:

{% stepper %}
{% step %}

#### Navigate to the ‘Project details’ tab

{% endstep %}

{% step %}

#### Update the Car Driver emissions

Update the Car Driver emissions to the equivalent emissions calculated.
{% endstep %}
{% endstepper %}

| Emission intensity                                          |     |
| ----------------------------------------------------------- | --- |
| Does the project have its own proposed emissions intensity? | Yes |
| Car (Driver) (g CO2-e / vehicle km)                         | 194 |
| Motorbike (g CO2-e / passenger km)                          |     |

#### Example 2

This example is for a student residential accommodation building in Melbourne. The building is located 800m from the main university campus, does not offer any student parking facilities, but has incorporated bicycle storage for 50% of students residing within the building. The building is occupied for 40 weeks per year to align with the university calendar.

The project team is able to demonstrate, by way of providing a marked-up location map that the development is within 800m of the main university campus. Therefore, the project team can show that the average trip length for building occupants is reduced.

The project site does not provide any car parking facilities for student vehicles. Therefore the project team can justify a reduction in the car driver mode split to 0%.

The project team can also demonstrate that the “work weeks” for both the Reference and Proposed building projects are 40 weeks, to reflect the university calendar.

In addition, cyclist facilities have been provided for 50% of students.

This evidence allows the building to claim higher rates of bicycle mode share and lower rates of car driver mode share relative to the Reference project. In addition, the project team is able to demonstrate a reduction in average trip length and an adjustment to the work weeks for this project.

To enter this into the calculator:

{% stepper %}
{% step %}

#### Update the car driver mode split

Update the Proposed mode split for car drivers to 0%.
{% endstep %}

{% step %}

#### Update the bicycle mode split

Update the Proposed mode split for bicycles to 50%.
{% endstep %}

{% step %}

#### Update the average trip length

Update the Proposed Ave Trip Length to 0.8km.
{% endstep %}

{% step %}

#### Update the work weeks

Update both the Reference and the Proposed Work Weeks to 40 weeks.
{% endstep %}

{% step %}

#### Enter the remaining transport modes

Enter the remaining modes of transport as per the Sustainable Transport plan, ensuring the total mode share totals 100%.
{% endstep %}
{% endstepper %}

*Mode shares*

<table data-search="false"><thead><tr><th>Mode of travel</th><th>Reference</th><th>Proposed</th></tr></thead><tbody><tr><td>Train</td><td>4.38%</td><td>5.5%</td></tr><tr><td>Bus</td><td>0.65%</td><td>1.2%</td></tr><tr><td>Ferry</td><td>0%</td><td>0%</td></tr><tr><td>Tram</td><td>28.06%</td><td>34.3%</td></tr><tr><td>Car (Driver)</td><td>46.89%</td><td>0%</td></tr><tr><td>Car (Passenger)</td><td>4.64%</td><td>5%</td></tr><tr><td>Motorbike</td><td>1.11%</td><td>2%</td></tr><tr><td>Bicycle</td><td>12.88%</td><td>50%</td></tr><tr><td>Walk</td><td>1.37%</td><td>2%</td></tr><tr><td>Total mode share</td><td>99.98%</td><td>100%</td></tr><tr><td>Avoided Trips</td><td>2%</td><td>2%</td></tr><tr><td>Average trip length (km)</td><td>15.62</td><td>0.8</td></tr><tr><td>Work Weeks</td><td>40</td><td>40</td></tr><tr><td>Trips per annum</td><td>392</td><td>392</td></tr><tr><td>Emissions per trip (g CO2-e/trip)</td><td>2615.96221233</td><td>50.68137597</td></tr><tr><td>Total emissions (tonnes/person/annum)</td><td>1.02545719</td><td>0.0198671</td></tr><tr><td>Total vkt (vkt/person/annum)</td><td>2871.093456</td><td>0</td></tr><tr><td>Active modes (mode share % for active modes)</td><td>14.25%</td><td>52%</td></tr></tbody></table>

The occupier is not able to demonstrate that the occupants drive lower emissions cars than the Reference project, so no change in emissions intensity is claimed.

#### Example 3

This example is for a commercial office building in the Brisbane CBD. The building is located in close proximity to public transport and has therefore been able to reduce the number of car parking spaces provided on-site. The building owner has also provided additional motorbike spaces and electric charging stations.

The project site provides 60 car parking spaces in total. With a building population of 3000 people, this means that 2% of building occupants are able to drive and park on-site. Therefore, the project team can justify a reduction in the car driver mode split to 2%.

The project site also provides 100 motorbike parking spaces. With a building population of 3000 people, this means that 3.3% of building occupants are able to ride and park their motorbikes on-site. Therefore, the project team can justify an increase in the motorbike mode split to 3.3%.

This evidence allows the building to claim higher rates of motorbike mode share and lower rates of car driver mode share relative to the Reference project.

To enter this into the calculator:

{% stepper %}
{% step %}

#### Update the car driver mode split

Update the Proposed mode split for car drivers to 2%.
{% endstep %}

{% step %}

#### Update the motorbike mode split

Update the Proposed mode split for motorbikes to 3.3%.
{% endstep %}

{% step %}

#### Enter the remaining transport modes

Enter the remaining modes of transport as per the Sustainable Transport plan, ensuring the total mode share totals 100%.
{% endstep %}
{% endstepper %}

*Mode shares*

<table data-search="false"><thead><tr><th>Mode of travel</th><th>Reference</th><th>Proposed</th></tr></thead><tbody><tr><td>Train</td><td>25.58%</td><td>33%</td></tr><tr><td>Bus</td><td>29.49%</td><td>38%</td></tr><tr><td>Ferry</td><td>1.98%</td><td>2.5%</td></tr><tr><td>Tram</td><td>0.03%</td><td>0%</td></tr><tr><td>Car (Driver)</td><td>24.79%</td><td>2%</td></tr><tr><td>Car (Passenger)</td><td>6.96%</td><td>9%</td></tr><tr><td>Motorbike</td><td>1.71%</td><td>3.3%</td></tr><tr><td>Bicycle</td><td>3%</td><td>3.9%</td></tr><tr><td>Walk</td><td>6.48%</td><td>8.3%</td></tr><tr><td>Total mode share</td><td>100.02%</td><td>100%</td></tr><tr><td>Avoided Trips</td><td>2%</td><td>2%</td></tr><tr><td>Average trip length (km)</td><td>16.71</td><td>16.7</td></tr><tr><td>Work Weeks</td><td>48</td><td>48</td></tr><tr><td>Trips per annum</td><td>470.4</td><td>470.4</td></tr><tr><td>Emissions per trip (g CO2-e/trip)</td><td>2220.47198822</td><td>1618.72179245</td></tr><tr><td>Total emissions (tonnes/person/annum)</td><td>1.04451002</td><td>0.76144673</td></tr><tr><td>Total vkt (vkt/person/annum)</td><td>1948.5891936</td><td>157.1136</td></tr><tr><td>Active modes (mode share % for active modes)</td><td>9.48%</td><td>12.2%</td></tr></tbody></table>

In addition, of the 60 car spaces provided, 10 spaces are provided with electric vehicle charging stations. As such, the project team are able to claim lower emissions intensity for these car spaces. The type of electric vehicle permitted by the charging station has an emissions intensity of 90 g CO2-e/passenger km, when driven in Queensland.

Therefore, the project team can enter the following emissions intensity for the project:

$$
\frac{(258 \times 50) + (90 \times 10)}{60\ vehicles} = 230
$$

To enter this into the calculator:

{% stepper %}
{% step %}

#### Update the Car Driver emissions

Update the Car Driver emissions to the equivalent emissions calculated.
{% endstep %}
{% endstepper %}

*Emission intensity*

| Emission intensity                                          |     |
| ----------------------------------------------------------- | --- |
| Does the project have its own proposed emissions intensity? | Yes |
| Car (Driver) (g CO2-e / vehicle km)                         | 230 |
| Motorbike (g CO2-e / passenger km)                          |     |

## <mark style="color:$primary;">Version control</mark>

| Version | Date       | Summary of change                                                                                      |
| ------- | ---------- | ------------------------------------------------------------------------------------------------------ |
| 1       | 07/09/2021 | <p>Initial release for Green Star Buildings.<br>(Adapted from Green Star – Design & As Built v1.3)</p> |

[^1]: Accessed from <http://www.climatechange.gov.au/sites/climatechange/files/files/climate-change/skmmma-transport-modelling-pdf.pdf>, 21st March 2014.

[^2]: Accessed from <https://www.epa.vic.gov.au/about-epa/publications/1797> - 1797: Greenhouse gas (GHG) inventory and management plan 2018–2019, 11th March 2021.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://greenstarresources.gbca.au/greenstarresources.gbca.au_ratingtools/current-green-star-rating-tools/green-star-buildings/v1.0-rev-c/calculation-guides/movement-and-place-calculation-guide.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
