> For the complete documentation index, see [llms.txt](https://greenstarresources.gbca.au/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://greenstarresources.gbca.au/greenstarresources.gbca.au_ratingtools/current-green-star-rating-tools/green-star-buildings/v1.0-rev-c/categories-and-credits/responsible/6-or-responsible-structure.md).

# 6 | Responsible Structure

Points: 5

## <mark style="color:$primary;">Outcome</mark>

The building's structure is comprised of responsibly manufactured products.

## <mark style="color:$primary;">Criteria</mark>

<mark style="color:$success;">**Credit Achievement — 3 points**</mark>

* [#id-6.1.1-good-practice-products](#id-6.1.1-good-practice-products "mention")**:** **50%** of all structural components (by cost) meet a Responsible Products Value of at least **10**.

<mark style="color:$success;">**Exceptional Performance — 2 points**</mark>

In conjunction with the *Credit Achievement*:

* [#id-6.2.1-best-practice-products](#id-6.2.1-best-practice-products "mention")**: 10%** of all products in the structure (by cost) meet a Responsible Products Value of at least **15**

or

* [#id-6.2.2-good-practice-products](#id-6.2.2-good-practice-products "mention")**: 80%** of all products in the structure (by cost) meet a Responsible Products Value of at least **10**.

***

## <mark style="color:$primary;">Additional information</mark>

#### Stage implementation

Strategy | Brief | Concept | **Design** | **Tender** | **Construction** | Handover | Use

#### Synergies with other credits

* Responsible Envelope
* Responsible Systems
* Responsible Finishes
* Life Cycle Impacts
* Upfront Carbon Emissions

#### Sustainable Development Goals

* **Goal 9:** Industry, Innovation and Infrastructure
* **Goal 12:**  Responsible Consumption and Production

***

## <mark style="color:$primary;">Requirements</mark>

### <mark style="color:$success;">Credit Achievement</mark>

The project must comply with the following criteria:

* Good practice products

#### 6.1.1 Good practice products

The project must have **50%** of all structural components (by cost) meet a Responsible Products Value of at least **10.**

The structure is defined as load bearing and stability components of a building, including steel, timber, concrete load bearing elements.

Values for each product can be calculated by using the Responsible Products Value calculator.

### <mark style="color:$success;">Exceptional Performance</mark>

In conjunction with the *Credit Achievement*, the project must comply with **one** of the following criteria:

* Best practice products
* Good practice products

#### 6.2.1 Best practice products

The project must have **10%** of all products in the structure (by cost) meet a Responsible Products Value of at least **15.** These products do not need to be in addition to the Credit Achievement; they can be used towards meeting the Credit Achievement.

See *Credit Achievement* requirements for further information.

#### 6.2.2 Good practice products

The project must have **80%** of all products in the structure (by cost) meet a Responsible Products Value of at least **10.**

See *Credit Achievement* requirements for further information.

***

## <mark style="color:$primary;">Alternative pathways</mark>&#x20;

Where there are alternative pathways that a project can follow to achieve the credit, or sector specific alternatives.&#x20;

These were previously referred to as *Frequently Asked Questions*.&#x20;

<details>

<summary>Alternative pathways</summary>

</details>

***

## <mark style="color:$primary;">Clarifications</mark>

Where GBCA have clarified any requirements of the credit criteria. This information is additional and it is not complusory to apply.

These were previously referred to as *Frequently Asked Questions*.&#x20;

<details>

<summary>Clarifications</summary>

</details>

***

## <mark style="color:$primary;">Submission content</mark>

#### Submissions for this credit must contain:

* **Submission form** through Green Star Online
* **Evidence** to support claims made in the submission

#### Recommended evidence:

* Receipts confirming purchase of stated products
* Evidence that claimed products with required RPV constitute required cost of all structural components

Alternate documentation can also be used by project teams to demonstrate compliance.

Refer to the [Guidance for Submitting for Designed Assessments](https://greenstarresources.gbca.au/greenstarresources.gbca.au_ratingtools/current-green-star-rating-tools/other-useful-resources/guidance-for-submitting-for-designed-assessments.md) for further information on submitting evidence for the Designed assessment.

The key requirement is that evidence is provided to support each claim made within the Submission form.

***

## <mark style="color:$primary;">Guidance</mark>

**Responsible Products Value**\
The Responsible Products Value for a product is calculated by manufacturers and suppliers based on which of the relevant initiatives their product complies with. To assist them in demonstrating compliance, a number of third-party certification schemes and independent verification methods have been pre-approved as compliant with the many initiatives in the Responsible Products Framework.

Examples of recognised initiatives are:

* Industry wide environmental product declarations (EPD)
* Product specific environmental product declarations (EPD)
* ISO14001 certification
* Climate Active Carbon Neutral Certification
* Chain of custody certification
* Third-party product certification schemes.

The list of compliant schemes and verification methods that can be used to demonstrate compliance is available on the GBCA website.

**Calculating the RPV in a product where one or multiple components have an RPV, but the final product does not**\
When calculating the RPV score of a product that has a number of components, and where only one of these complies, the item should be broken down into its key major components (approximately those that make up 80% of the mass of the item in question). An approximate estimate will suffice. Each item is assigned an RPV score and multiplied by the key component makeup, and the total RPV is calculated by adding up these values.

For example, in a chair with three key components (timber, foam, fabric), the following would apply:

* Timber (60%) with an RPV of 10 = 6
* Foam (20%) with RPV of 0 = 0
* Fabric (20%) with RPV of 12 = 2.4

The chair would have an RPV of 8.4

**Dual purpose elements**\
Elements that serve a dual purpose (e.g., load bearing façade) can be claimed in this and other 'Responsible' credits.

**Calculating compliance**\
The percentage of cost that has a compliant score is used to determine compliance with the credit.

Cost can be calculated either as total cost (materials + labour) or materials only. However, the cost used must be consistent for the whole calculation (consistency in the numerator and denominator). For example, if the total cost is used to calculate the compliant structural components, the total cost must be used to calculate the full structural component cost. Project teams may use different approaches between Responsible products credits but must be consistent in their approach within the credit.

**Procuring products with a compliant RPV**\
The Responsible Products Value website includes a list of compliant scheme combinations to assist project teams to procure compliant products. In the future this list will be supplanted by a product directory. The list can be found on the [GBCA website](https://www.gbca.au/responsible-products-program).

**Calculation Guide**\
[Responsible Products calculation guide](https://greenstarresources.gbca.au/greenstarresources.gbca.au_ratingtools/current-green-star-rating-tools/green-star-buildings/v1.0-rev-c/calculation-guides/responsible-products-calculation-guide.md)

***

## <mark style="color:$primary;">Definitions</mark>

[Glossary](https://greenstarresources.gbca.au/greenstarresources.gbca.au_ratingtools/current-green-star-rating-tools/all-definitions.md#responsible-systems)

[Glossary](https://greenstarresources.gbca.au/greenstarresources.gbca.au_ratingtools/current-green-star-rating-tools/all-definitions.md#structure)

[Glossary](https://greenstarresources.gbca.au/greenstarresources.gbca.au_ratingtools/current-green-star-rating-tools/all-definitions.md#envelope)

[Glossary](https://greenstarresources.gbca.au/greenstarresources.gbca.au_ratingtools/current-green-star-rating-tools/all-definitions.md#finishes)

***

## <mark style="color:$primary;">Supporting information</mark>

The following resources support this credit:

* Responsible Products Framework: [https://new.gbca.org.au/rate/rating-system/responsible-products-framework/](https://www.gbca.au/responsible-products-program)


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://greenstarresources.gbca.au/greenstarresources.gbca.au_ratingtools/current-green-star-rating-tools/green-star-buildings/v1.0-rev-c/categories-and-credits/responsible/6-or-responsible-structure.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
