> For the complete documentation index, see [llms.txt](https://greenstarresources.gbca.au/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://greenstarresources.gbca.au/greenstarresources.gbca.au_ratingtools/current-green-star-rating-tools/green-star-buildings/v1.0-rev-c/categories-and-credits/sector-specific-credits/tenant-energy-source.md).

# Tenant Energy Source

**Positive** · **Points:** 5

{% hint style="info" %}
**Sector Specific credit**

**Applicability:** Buildings where more than 20% of GFA is leased to tenants, e.g. office, retail, industrial, residential
{% endhint %}

## <mark style="color:$primary;">Outcome</mark>

The building owner assists tenants to eliminate their energy related carbon emissions

## <mark style="color:$primary;">Criteria</mark>

<mark style="color:$success;">**Credit Achievement — 2 points**</mark>

* The building owner actively assist tenants to procure renewable electricity
* At least 40% of tenant space (by NLA) uses 100% renewable electricity

<mark style="color:$success;">**Exceptional Performance — 3 points**</mark>

* At least 80% of tenant space (by NLA) uses 100% renewable energy

***

## <mark style="color:$primary;">Additional information</mark>

#### **Stage implemented**

**Strategy** | **Brief** | **Concept** | Design | Tender | Construction | **Handover** | **Use**

#### Synergies with other credits

* Energy Source

#### Sustainable Development Goals

* **Goal 7:** Affordable and Clean Energy
* **Goal 13:** Climate Action

#### Relevant reporting initiatives

* GRESB
* Task Force on Climate-related Financial Disclosures **(TCFD)**

***

## <mark style="color:$primary;">Requirements</mark>

### <mark style="color:$success;">Credit Achievement</mark>

To target the Credit Achievement, project teams must achieve the Credit Achievement in the Energy Source credit in the Positive Category.

The project must comply with all three of the following criteria:

* Renewable Electricity Mechanism
* Engagement Activities
* Engaged Tenants

#### **Renewable Electricity Mechanism**

The building owner must provide and actively promote a mechanism for all tenants to be able to procure renewable electricity. Renewable electricity purchased must be in line with Appendix A of GBCA's 'Climate Positive Buildings and our Net Zero Ambitions'. The mechanism used must also allow the building owner to collect information from the tenant related to their energy consumption on an annual basis.

#### **Engagement Activities**

The building owner actively encourages tenants to address their energy emissions through an engagement campaign with tenants. This can be via programs related to the building (websites, brochures, emails, meetings, etc). The engagement should cover reducing energy consumption, eliminating fossil fuels, and procuring renewable electricity.

#### **Engaged Tenants**

At least 40% of tenant space (NLA) has, or will be required to, contractually commit to procuring 100% renewable electricity for the duration of the lease.

### <mark style="color:$success;">Exceptional Performance</mark>

The project must comply with **both** of the following criteria:

* Renewable Electricity
* Fossil Fuel Use

#### **Renewable Electricity**

At least 80% of tenant space (NLA) has, or will be required to, contractually commit to procuring 100% renewable electricity for the duration of the lease. The building owner and the tenant must agree to share data regarding the base building energy consumption and tenant energy consumption.

Where less than 30% of remaining tenanted space has not been leased (to achieve the 80% threshold), the building owner can procure Large Generation Certificates (LGCs) for an equivalent modelled consumption of three years and surrender them to the regulator.

#### **Fossil Fuel Use**

In at least 80% of the tenant space (by NLA) fossil fuels cannot be used for tenant supplied domestic hot water, space heating or cooking.

Base building domestic hot water or space heating cannot use fossil fuels.

***

## <mark style="color:$primary;">Guidance</mark>

**Applicability**\
This credit applies to all buildings where more than 20% of the area of the building is commercially leased to tenant entities that are separate to the building owner and operator (e.g. hotel operator). For buildings where there is no or little tenanted space, or where the building owner retains operational control over most spaces, those emissions from energy would be covered under Energy Source.

**Scope**\
Energy consumption is defined as any energy consumed by tenant installed equipment. This includes tenant plug loads, tenant installed equipment and general appliance use. Manufacturing or process loads are included in this credit.

**Market-based method and the renewable power percentage (RPP)**\
Project teams can claim the percentage of renewable energy in the grid (the RPP) as published by the Clean Energy Regulator at the date of Practical Completion of the building as off-site renewable energy supply. For further information, refer <http://www.cleanenergyregulator.gov.au/RET/Scheme-participants-and-industry/the-renewable-power-percentage>

**Offsets and Renewable Electricity**\
Renewable electricity and offsets for on-site fossil fuels must comply with Appendix A, B, and C of the guide 'Climate Positive Buildings and our Net Zero Ambitions' published by GBCA.

**Renewable Electricity Mechanism**\
Mechanisms that can be used include clauses in standard lease agreements, introduction of levies or incentives, programs made available through tenant portals, or any other similar mechanism that allows the building owner to encourage tenants to move to renewable electricity. Carbon offsets are not recognised as renewable electricity. The building owner can also supply renewable energy through an embedded network to tenants.

***

## <mark style="color:$primary;">Submission content</mark>

#### Submissions for this credit must contain:

* Submission Summary via the online portal
* Evidence to support claims made in the submission

#### Recommended evidence

* Evidence of the mechanism used to encourage tenants to address their emissions (contracts, incentive documents, portal screenshots, etc)
* Communications material to show intent to encourage tenants to address their emissions
* Extracts from the agreements showing that data will be shared between building owner and tenants
* Summary of tenants in the building, confirmation of which tenants are using renewables, and a description of how this is being achieved.

***

## <mark style="color:$primary;">Supporting information</mark>

The following resources support this credit:

* Climate positive buildings and our net zero ambitions
* GBCA's Climate Positive Roadmap
* WorldGBC's Net Zero Carbon Buildings Commitment
* Clean Energy Regulator's Renewable Power Percentage


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://greenstarresources.gbca.au/greenstarresources.gbca.au_ratingtools/current-green-star-rating-tools/green-star-buildings/v1.0-rev-c/categories-and-credits/sector-specific-credits/tenant-energy-source.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
