> For the complete documentation index, see [llms.txt](https://greenstarresources.gbca.au/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://greenstarresources.gbca.au/greenstarresources.gbca.au_ratingtools/current-green-star-rating-tools/green-star-buildings/v1.1/calculation-guides/movement-and-place-calculation-guide.md).

# Movement and Place calculation guide

Guidance on calculation methods for the [*Sustainable Transport*](https://greenstarresources.gbca.au/pages/7isN5iK0Tx6oKSfrNuxt#id-30.1.1-sustainable-transport) criterion in the [*Movement and Place*](https://greenstarresources.gbca.au/greenstarresources.gbca.au_ratingtools/current-green-star-rating-tools/green-star-buildings/v1.1/categories-and-credits/places-2/30-or-movement-and-place.md) credit in Green Star Buildings v1.1.

{% hint style="warning" %}
**Release 1 - 18/11/2026**&#x20;

* Initial release for Green Star Buildings v1.1.

[#version-control](#version-control "mention")
{% endhint %}

<table data-search="false"><thead><tr><th width="735.25">Section</th></tr></thead><tbody><tr><td><a href="#introduction"><strong>Introduction</strong></a></td></tr><tr><td><a href="#about-this-guide">About this guide</a></td></tr><tr><td><a href="#how-to-use-this-guide">How to use this guide</a></td></tr><tr><td><a href="#definitions"><strong>Definitions</strong></a></td></tr><tr><td><a href="#calculating-reductions-in-private-vehicle-use"><strong>Calculating reductions in private vehicle use</strong></a></td></tr><tr><td><a href="#comparison-against-the-reference-project">Comparison against the <em>Reference project</em></a></td></tr><tr><td><a href="#demonstrating-improvements-in-the-proposed-project">Demonstrating improvements in the <em>Proposed project</em></a></td></tr><tr><td><a href="#appendix"><strong>Appendix</strong></a></td></tr><tr><td><a href="#appendix-a-defining-the-reference-project">Appendix A: Defining the <em>Reference project</em></a></td></tr><tr><td><a href="#appendix-b-example-calculations">Appendix B: Example Calculations</a></td></tr><tr><td><a href="#version-control">Version Control</a></td></tr></tbody></table>

## <mark style="color:$primary;">Introduction</mark>

### About this guide

This document sets out the basis on how a project can demonstrate an improvement in reducing private vehicle use and how it should be shown in the *Movement and Place calculator* for Green Star Buildings v1.1.

The guide is adapted from Green Star Buildings v1. The key differences between version 1 and version 1.1 are:

* the removal of the emission reduction requirement in the *Reducing Private Vehicle Use* requirement, and;
* amenity diversity can be demonstrated without the use of the *Movement and Place calculator.*

### How to use this guide

#### Movement and Place credit

The guidance in this document relates to the [*Reducing Private Vehicle Use*](https://greenstarresources.gbca.au/greenstarresources.gbca.au_ratingtools/current-green-star-rating-tools/green-star-buildings/v1.1/categories-and-credits/places-2/30-or-movement-and-place.md#reducing-private-vehicle-use) requirement in the [*Sustainable Transport*](https://greenstarresources.gbca.au/pages/7isN5iK0Tx6oKSfrNuxt#id-30.1.1-sustainable-transport) criterion in *Credit Achievement* for the [*Movement and Place*](https://greenstarresources.gbca.au/greenstarresources.gbca.au_ratingtools/current-green-star-rating-tools/green-star-buildings/v1.1/categories-and-credits/places-2/30-or-movement-and-place.md) credit. This is calculated by the *Movement and Place calculator* that is available in the *Movement and Place Submission Template* on the [Green Star resources portal](https://www.gbca.org.au/greenstar-manager/resources/).

The Sustainable Transport Plan that is developed as part of the same *Sustainable Transport* criterion will inform the inputs for the *Proposed project* in the *Movement and Place calculator.*

Additional criteria must be met to achieve *Credit Achievement* for the credit. Refer to the [*Movement and Place*](https://greenstarresources.gbca.au/greenstarresources.gbca.au_ratingtools/current-green-star-rating-tools/green-star-buildings/v1.1/categories-and-credits/places-2/30-or-movement-and-place.md) credit for details.

#### Interdependence with other Green Star credits

**Low-Emissions Transport**

The number of car parks on which the approach for the [*Low-Emissions Transport*](https://greenstarresources.gbca.au/greenstarresources.gbca.au_ratingtools/current-green-star-rating-tools/green-star-buildings/v1.1/categories-and-credits/positive-3/27-or-low-emissions-transport.md) credit is based must align with the Sustainable Transport Plan and the *Movement and Place calculator* in the *Sustainable Transport* criterion.

## <mark style="color:$primary;">Definitions</mark>

[Glossary](https://greenstarresources.gbca.au/greenstarresources.gbca.au_ratingtools/current-green-star-rating-tools/all-definitions.md#mode-share)

[Glossary](https://greenstarresources.gbca.au/greenstarresources.gbca.au_ratingtools/current-green-star-rating-tools/all-definitions.md#project-population)

[Glossary](https://greenstarresources.gbca.au/greenstarresources.gbca.au_ratingtools/current-green-star-rating-tools/all-definitions.md#proposed-building)

[Glossary](https://greenstarresources.gbca.au/greenstarresources.gbca.au_ratingtools/current-green-star-rating-tools/all-definitions.md#reference-project)

[Glossary](https://greenstarresources.gbca.au/greenstarresources.gbca.au_ratingtools/current-green-star-rating-tools/all-definitions.md#suitably-qualified-professional)

[Glossary](https://greenstarresources.gbca.au/greenstarresources.gbca.au_ratingtools/current-green-star-rating-tools/all-definitions.md#proposed-building)

[Glossary](https://greenstarresources.gbca.au/greenstarresources.gbca.au_ratingtools/current-green-star-rating-tools/all-definitions.md#avoided-trips)

[Glossary](https://greenstarresources.gbca.au/greenstarresources.gbca.au_ratingtools/current-green-star-rating-tools/all-definitions.md#statistical-area-2-sa2)

[Glossary](https://greenstarresources.gbca.au/greenstarresources.gbca.au_ratingtools/current-green-star-rating-tools/all-definitions.md#work-weeks)

## <mark style="color:$primary;">Calculating reductions in private vehicle use</mark>

A reduction in private vehicle use is based on demonstrating the following in the *Proposed project* in comparison to the *Reference project*:

* Active mode encouragement which relates to an increase in the mode share of walk and bicycle commuting trips by 90%. &#x20;
* Vehicle kilometres travelled (VKT) reduction which refers to a reduced reliance on car trips by 20%.

### Comparison against the *Reference project*

The characteristics of the *Reference project* are determined automatically within the *Movement and Place calculator*. The *Reference project* is a hypothetical project of the same size, function and location as the *Proposed project*. Therefore both the *Reference* and *Proposed projects* share the same:

* Building type
* Project address
* Statistical Area 2 (SA2)

Based on the above data, the following parameters are automatically calculated for the *Reference project*:

* Mode share for each mode of travel
* Avoided trips
* Average trip length

For further details on how the *Reference project* values were determined, refer to [*Appendix A*](#appendix-a-defining-the-reference-project).

Inputs for the *Proposed project* on the above parameters are to be based on the project’s Sustainable Transport Plan developed as part of the [*Sustainable Transport*](https://greenstarresources.gbca.au/pages/7isN5iK0Tx6oKSfrNuxt#id-30.1.1-sustainable-transport) criterion also in Credit Achievement.

The number of work weeks for the *Reference project* and *Proposed project* are inputted by the project team. This is assumed to be 48 weeks (assuming 4 weeks of annual leave). Healthcare workers are assumed to work 47 weeks per annum and Education workers assumed to work 40 weeks per annum. This is separate from avoided trips, which only refers to additional avoided trips. Refer to the *Demonstrating improvements in the Proposed project* section below to claim a different value for the *Proposed project.*

### Demonstrating improvements in the *Proposed project*

To demonstrate a reduction in private vehicle use, the project team can demonstrate improvements for the following in the *Proposed project.* Further guidance for each parameter is provided below.

* Mode share for each mode of travel
* Avoided trips
* Average trip length
* Work weeks

The values claimed are supported by the project’s Sustainable Transport Plan and recommendations in the Plan are incorporated into the design, construction, and operation of the project.

#### **Mode share changes**

The following justifications can be considered:

**Walk**

Demonstrate that the claimed percentage of project users live (or in the case of a residential building, work) within walking distance of the building. The definition of walking distance depends on the project type. For example, students at a tertiary institution may have a higher tolerance for walking distance compared with office staff. Students at a primary school are likely to have the lowest tolerance for walking distance. It is the responsibility of the project team to justify the definition of walking distance appropriate to the project.

The project team must also justify the assumption that project users live nearby. For example, education or healthcare institutions with associated student or staff accommodation may be able to justify this.

**Cycle**

Demonstrate that cycle facilities are available for the claimed proportion of regular occupants. Building initiatives should be in place to facilitate cycle use, including secure bicycle parking, weather protection, changing facilities with provision of showers and lockers etc. Secure bicycle parking is defined as that which is in accordance with the [Bicycle parking](https://greenstarresources.gbca.au/greenstarresources.gbca.au_ratingtools/current-green-star-rating-tools/green-star-buildings/v1.1/categories-and-credits/places-2/30-or-movement-and-place.md#bicycle-parking) requirements in the *Active Transport Facilities* criterion.&#x20;

**Car (driver, passenger)**

Demonstrate that car parking is only available for the claimed proportion of car drivers and parking is not freely and readily available near the site for occupants to use. An incentive scheme for carpooling or to give up a parking space may also be claimed with documentation of how the scheme works and a justification for the proportion of reduced car trips claimed.

**Public transport (train, tram, bus, and ferry)**

Demonstrate that a scheme has been developed for incentivising public transport use. The claimed increase must be proportional to the incentive scheme.

#### **Trip length changes**

Evidence is produced that the workforce for this project commutes shorter distances than the *Reference project*.

For example, education or healthcare institutions with associated student or staff accommodation may be able to demonstrate this. This could also apply to a primary or secondary school with a zoning policy for enrolments. Route distances should be calculated via the route that is taken, rather than in a straight line (‘as the crow flies’).

#### **Avoided trips changes**

An incentive scheme is demonstrated or evidence of past rates of working from home is produced to justify increasing the avoided trips percentage for the company or workers/residents in the project. This does not apply to occupants such as students, who would not typically receive incentives for working from home.

#### **Work weeks changes**

Evidence is produced of a company policy with a higher than standard allowance for annual leave (i.e. greater than four weeks per annum).

## <mark style="color:$primary;">Appendix</mark>

### Appendix A: Defining the *Reference project*

**Mode share**

Mode share data for the *Reference project* is determined using SA2 level data from the Australian Bureau of Statistics (ABS) 2011 Census Method of Travel to Work (MTWP) data. The *Reference project* is a similar building type as the proposed project, which has the average mode share characteristics of places of employment within the same SA2 area as the proposed project.

The exception to the above is where the user selects “multi-unit residential” as the primary building type. In this instance the mode share data has the average characteristics of residents leaving an SA2 zone to travel to a place of employment elsewhere.

**Avoided trips**

Avoided trips refer to the propensity of employees to work from home or otherwise not take a commuting trip during a work week. Avoided trips are not differentiated by SA2 due to the large fluctuations and the difficulty of separating working from home data in the Census between employees who work from home occasionally compared to self-employed persons who work from home the majority of the time.

The standard value for avoided trips is 2% which is the 2011 Census value for working from home for all of Australia.

**Average trip length**

The average trip length for the *Reference project* is determined using the data from the ABS 2011 Census Method of Travel to Work (MTWP) data. By applying transport network analysis along the public road network, combined with the number of employees who travel to a given SA2 from every other SA2, the average trip length was determined for employees commuting to the SA2 of interest

### Appendix B: Example calculations

The following examples are based on the Movement and Place calculator.

These worked examples are not intended to cover all possible ways to credit achievement using the calculator, given the flexibility intended by the Movement and Place credit. Project teams are encouraged to propose additional avenues for achieving emissions reductions, increasing active transport modes, and reducing vehicle kilometres travelled.

#### Example 1

This example is for an office building in a regional town in Victoria. The building’s employees are offered small financial incentives for participating in a carpooling program and a larger incentive for cycling to work.

The project team can demonstrate, by way of program statistics or through an employee survey that 10% of employees are currently participating in, or willing to participate in a future carpooling scheme operated by the company residing in the building.

In addition, cycling facilities are sufficient to accommodate 15% of the building’s employees.

This evidence allows the building to claim higher rates of car passenger and bicycle mode share relative to the Reference project.

To enter this into the calculator:

1. Update the Proposed mode split for car passenger to 10%.
2. Update the Proposed mode split for bicycle to 15%.
3. Enter the remaining modes of transport as per the Sustainable Transport plan, ensuring the total mode share totals 100%.

<div align="left"><figure><img src="https://749968417-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FRL05MQuVhZhkDMQBuGrI%2Fuploads%2FIFC4146X2eqfq5glKkCG%2FExample%201.png?alt=media&amp;token=51ba6004-29bd-42c7-8c4a-1e6bf6833997" alt="" width="473"><figcaption></figcaption></figure></div>

The project demonstrates compliance with the requirements with an active mode encouragement of 207% and a vehicle kilometres travelled reduction of 20%.

#### Example 2

This example is for a student residential accommodation building in Melbourne. The building is located 800m from the main university campus, does not offer any student parking facilities, but has incorporated bicycle storage for 50% of students residing within the building. The building is occupied for 40 weeks per year to align with the university calendar.

The project team is able to demonstrate, by way of providing a marked-up location map that the development is within 800m of the main university campus. Therefore, the project team can show that the average trip length for building occupants is reduced.

The project site does not provide any car parking facilities for student vehicles. Therefore the project team can justify a reduction in the car driver mode split to 0%.

The project team can also demonstrate that the “work weeks” for both the Reference and Proposed building projects are 40 weeks, to reflect the university calendar.

This evidence allows the building to claim higher rates of bicycle mode share and lower rates of car driver mode share relative to the Reference project. In addition, the project team is able to demonstrate a reduction in average trip length and an adjustment to the work weeks for this project.

To enter this into the calculator:

1. Update the Proposed mode split for car drivers to 0%
2. Update the Proposed mode split for bicycles to 50%
3. Update the Proposed Ave Trip Length to 0.8km
4. Update both the Reference and the Proposed Work Weeks to 40 weeks
5. Enter the remaining modes of transport as per the Sustainable Transport plan, ensuring the total mode share totals 100%

<div align="left"><figure><img src="https://749968417-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FRL05MQuVhZhkDMQBuGrI%2Fuploads%2FNCXG8EqHpCotY1UD5A8J%2FExample%202.png?alt=media&amp;token=b93643c7-177b-44eb-8684-31cb5bd64908" alt="" width="502"><figcaption></figcaption></figure></div>

The project demonstrates compliance with the requirements with an active mode encouragement of 265% and a vehicle kilometres travelled reduction of 100%.

#### Example 3

This example is for a commercial office building in the Brisbane CBD, Queensland. The building is located in close proximity to public transport and has therefore been able to reduce the number of car parking spaces provided on-site. The building owner has also provided additional electric charging stations and bicycle parking.

The project site provides 60 car parking spaces in total. With a regular occupancy of 3000 people, this means that 2% of building occupants are able to drive and park on-site. Therefore, the project team can justify a reduction in the car driver mode split to 2%.

The project site also provides 300 bicycling parking spaces. With a regular occupancy of 3000 people, this means that 10% of building occupants are able to ride and park their bicycles on-site. Therefore, the project team can justify an increase in the bicycle mode split to 10%.

This evidence allows the building to claim higher rates of motorbike mode share and lower rates of car driver mode share relative to the Reference project.

To enter this into the calculator:

1. Update the Proposed mode split for car drivers to 2%
2. Update the Proposed mode split for bicycles to 10%
3. Enter the remaining modes of transport as per the Sustainable Transport plan, ensuring the total mode share totals 100%

<div align="left"><figure><img src="https://749968417-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FRL05MQuVhZhkDMQBuGrI%2Fuploads%2FJqJ7VsMjUxn7P1wJSiTN%2FExample%203.png?alt=media&amp;token=ad99eae3-e83d-4e8b-bc09-a994c071f647" alt="" width="474"><figcaption></figcaption></figure></div>

The project demonstrates compliance with the requirements with active mode encouragement of 93% and a vehicle kilometres travelled reduction of 92%.

## <mark style="color:$primary;">Version Control</mark>

| Version | Date       | Summary of change                              |
| ------- | ---------- | ---------------------------------------------- |
| 1       | 18/11/2026 | Initial release for Green Star Buildings v1.1. |


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://greenstarresources.gbca.au/greenstarresources.gbca.au_ratingtools/current-green-star-rating-tools/green-star-buildings/v1.1/calculation-guides/movement-and-place-calculation-guide.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
